ADSL2+ 1Port WIFI Router
The A100WL is a high integrated residential broadband access device. It provides one ADSL2+ RJ11 port, one build-in Ethernet ports access point. The A100WL fully complies with ADSL/2/2+ standards and can provide high performance access to Internet, downstream up to 24 Mbps and up stream up to 1 Mbps. The Ethernet section complies with IEEE802.3/802.3u standards. Once this device is connected to Internet by DSL line, the computers on the LAN side can share the Internet access by Ethernet port access point. At the same time, these local computers can also communicate with each other, sharing the resources and files.
l Shared broadband internet access
l Higher data rate broadband sharing
l PC file and application sharing
l Network and online gaming
SDRAM Embedded 8MB
Features and Technical Specifications
Downstream: up to 24 Mbps
Upstream: up to 2 Mbps (Annex M) or up to 1 Mbps (Annex other)
Support up to 8 permanent virtual circuits (PVCs)
Industry standard and interoperable DSL interface
General IP: NAT/PAT,DHCP server/relay, DNS relay
Routing: Static routing, RIP V1 and V2
Security: NAT, IP filtering, Password Authentication, Denial of Service (DoS)
Support ANSI T1.413 Issue2
Support ITU G.992.1 (G.dmt) Annex A
Support ITU G.992.2 (G.lite) Annex A
Support ITU G.992.3 ADSL2 (G.dmt.bis) Annexs A, L, M
Support ITU G.992.4 ADSL2 (G.lite.bis)
Support ITU G.992.5 ADSL2+
Fully compliant with IEEE802.3/802.3u auto-negotiation function.
Support 10base-T and 100base-TX.
Support half duplex and full duplex.
Support back pressure flow control for half duplex and IEEE802.3x flow control for full duplex.
Support MDI/MDIX auto cross.
802.11g: 64QAM, 16QAM, QPSK, BPSK,DSSS
802.11b: CCK, DQPSK, DBPSK
HT20 and HT40: 64 QAM, 16QAM, QPSK,BPSK
Wireless data rate
802.11b: 11, 5.5, 2, 1 Mbps per channel, auto fallback for extended range
802.11g: 54, 48, 36, 24, 18, 12, 9, 6 Mbps per channel, auto fallback for extended range
HT20: up to 150 Mbps
HT40: up to 300 Mbps
64-bit, 128-bit WEP, AES, TKIP, WPA, WPA2,802.1x
1 push power switch
1 DC power jack
1 LAN 10/100M Auto MDI/MDIX RJ45 port
1 factory reset button
1 WAN RJ11 DSL port
1 x WPS button
1 x WLAN button
RFC 1483 Bridge
IEEE 802.1D transparent bridging
RFC 1483 Router
RIP 1 & 2 supported
DHCP (RFC1541) Server, Relay
Network Address Translation (NAT)/ Network Address Port Translation (NAPT) DNS relay
IGMP v1 and v2
RFC 1483 router/bridge
Support Web/TFTP mode which use as native and long-distance edition upgrade.
Support Web interface setting.
Support Telnet CLI command line.
Support the reset function: hardware reset or Web interface mode.
Support configuration file backup and restoration.
Support LAN port IP address amend function.
Support system log function.
Support SNMP V1/V2C native and long-distance control (MIB II
RFC1213/ADSL line MIB RFC 2662 ATM MIB RFC 2515).
Support SNTP enactment.
Support firewall function.
Support two-level users and passwords (can be revised) for login.
Support the electronic signature function (preventing different types of editions from upgrading each other).
Support DoS which detects and protects a number of attacks (such as
SYN/FIN/RST Flood, Smurf, WinNuke, Echo Scan, Xmas Tree Scan).
Support packet filter based on IP and port.
Support access control based on MAC.
Support PAP and CHAP authentication.
Operating temperature: 0°C~40°C (32°F~104°F)
Storage temperature: -40°C~70°C (-13°F~131°F)
Operating humidity: 5%~95%, non-condensing
Storage humidity: 5%~95%, non-condensing
EMC and Safety
FCC class B
CE Mark class B